Staircase Raised Panel Wainscoting Photo Gallery

Wainscoting America Gallery | Staircase Raised Panel Wainscoting

Custom Staircase Wainscoting has never been easier. Will assist with How To measure the slope accurately.

Classic Raised Panel Staircase with Column and custom triangle panel in foyer. Installed in Wolcott CT.

Raised Panel Clipped Custom Panel under the staircase located in the Foyer.

Clipped Staircase Raised Panel located in the Foyer.

Triangle Staircase Raised Panel above the landing.

Staircase Raised Panel Wainscoting on a staircase that does not have a stringer. Beautiful Iron Railing.

Beaded Raised Panel on staircase and in foyer. Notice how the staircase panel on the landing is about 34" and the back side of the landing panel is much taller.

Raised Panels in foyer and staircase with a beautiful 3 1/4" poplar wood top cap molding.

small staircase wainscot panel that changes elevation height.

Beautiful fluted column incorporated into the corner of the raised panel on the staircase.

Staircase Raised Panel transitions from the first floor foyer onto the staircase by reducing the panel height on the staircase slightly to accommodate the height of the staircase stringer.

Classic Raised Panel Wainscoting on a Staircase with a landing.

Custom Raised Panels in a Foyer located in Wolcott, CT.

Grand Staircase with mahogany treads and custom raised panels.

Staircase Raised Panel stops 1" from the corner.

Curved Wainscoting Staircase Panel is made from PVC so that it will bend into the corner.

Clipped custom curved Raised Panel in Foyer made from PVC so it will bend around corner

Long Staircase Raised Panel Wainscoting

Custom Staircase Raised Panel Wainscoting in Foyer

Staircase Raised Panel Wainscoting. Notice how the raised panel stops 1 inch from the corner so that the top cap can wrap around panel and not stick out past the corner.

Staircase Raised Panel goes around an outside corner. Notice how the panel levels out for 3 1/2" before turning around the corner. This is important so that the top cap molding can be mitered at the corner.

« prev
1
next »