Depending on the configuration and number of inner panels it may be required to fabricate the panels in two or more sections. If more than one section is required the joint(s) will be either a biscuit or lap joint. If we biscuit slot the panels we will provide the biscuits with the order. Joint(s) should have glue applied to the biscuits before joining panels together on the wall. A thin layer of wood fill should then be applied over the joints and sanded smooth prior to priming.  We also recommend using some construction adhesive between the sheetrock and the back of the panel to also ensure there is not movement in the seams.

The system will calculate the shipping when you enter your city state and zip.

Typically we will fabricate and ship your order within 5 business days. Occasionally orders will spike and the lead time will increase to 7+ days.

We will ship your order standard freight from our Wolcott, Connecticut facility. Depending on your proximity to our business the shipping time will be 2 to 7 business days.

The size and weight of the order will determine how it will ship. Small orders will ship either UPS or Fed Ex Ground. Large or heavy orders will mostly likely ship with XPO and are curb side delivery for residential addresses. Curb side delivery is where the freight carrier will pull the truck up to the curb and the customer will be required to move them from the curb to the house. The wainscoting panels will be boxed and on a pallet.

No,  We used to ship to Canada, but the brokerage fees, VAT fees and exchange rate make it prohibitive.  Maybe someday if these barriers are eliminated we will be able to ship to our Canadian friends.  We have coordinated shipments to northern states where customer can coordinate bringing the orders across the border.

All our moldings and beadboard ship in lengths up to 94".  An 8FT molding is considered 94" long.  This 94" limit is based on UPS and Freight Surcharges of $375 for box and pallet lengths 96" or greater.